This is a simple Hueforge map of Westeros from Game of Thrones. If you resize the model, do not change the Z-axis dimensions. I have used five colors, but I prefer not to use pauses in the print. So, after layer 13, you will need to either split the blue filament with the white or add a pause in the slicer.

Filaments Used:
PLA BambuLab Matte Marine Blue Transmission Distance: 5
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Matte Pine Green Transmission Distance: 1
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Bambulab Jade White Transmission Distance: 5

Swap Instructions:
Start with Marine Blue
At layer #13 (1.12mm) swap to Black
At layer #18 (1.52mm) swap to Pine Green
At layer #19 (1.6mm) swap to Beige
At layer #21 (1.76mm) swap to White for the rest.