Project: Harry Potter Patronum .hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 146.04x200mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PLA Bambu Cian Transmission Distance: 5
PLA smatfil light green Transmission Distance: 3
PLA Jayo White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Cian
At layer #15 (1.28mm) swap to light green
At layer #21 (1.76mm) swap to White for the rest.