This is a standardized modular platform for your H0 needs, by default it is 45mm wide, feel free to make it as wide/thin as you need only the end caps will change size, you can combine elements to create parallel modules with crossings ramps or end pieces, I will try to add more features if suggested to keeep with the same standard.

Print with no supports, either upside down if you have a good first layer or use PrusaSlicer ironing to smooth the final layer.

From 0,1 to 0,2 depending how detailed you need this.

If for any reason you want to cut the pieces do not change the size but cut a distance from the end, all pieces are measured, the vertical support is 2mm wide and the decorative panels 20mm wide everywhere except the end pieces where the size is 19,5mm due to the default width.

Print Settings

• Printer brand:

  Creality

• Printer:

  Ender 3

• Rafts:

  No

• Supports:

  No

• Resolution:

  0,2

• Infill:

  15

• Filament brand:

  DevilDesign

• Filament color:

  Light Grey

• Filament material:

  PLA