利用多种颜色耗材分别在不同层打印所得到的2D浮雕画
以 100% 填充打印,层高为 0.08mm,底层为 0.2mm
模型尺寸为 200x105mm
您可以在低于最小深度 0.52mm 的更高层高下打印
最大深度为 2.8mm,实际深度为 2.8mm
使用的细丝:
PETG JAYO 黑色传输距离:0.3
PETG Fillamentum 冰绿色透明传输距离:32
PETG PolyLite 白色传输距离:5
此打印使用 3 种独特的细丝
打印说明:
从黑色开始
在第 14 层(1.24mm)交换为冰绿色透明
在第 24 层(2.04mm)将其余部分交换为白色。
=================================================
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 200x105mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.8mm and the Actual Depth is 2.8mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG Fillamentum Iced Green Transp Transmission Distance: 32
PETG PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.24mm) swap to Iced Green Transp
At layer #24 (2.04mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.