Darth Vader

Once the heroic Jedi Knight named Anakin Skywalker, Darth Vader was seduced by the dark side of the Force. Forever scarred by his defeat on Mustafar, Vader was transformed into a cybernetically-enhanced Sith Lord. At the dawn of the Empire, Vader led the Empire’s eradication of the Jedi Order and the search for survivors. He remained in service of the Emperor -- the evil Darth Sidious -- for decades, enforcing his Master’s will and seeking to crush the Rebel Alliance and other detractors. But there was still good in him…

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 179.2x148.13mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.8mm and the Actual Depth is 2.5mm

Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 1.6
PLA+ Numakers Nuclear Red Transmission Distance: 4.8
PLA+ IIID Max Yellow Transmission Distance: 5
PLA Default White Transmission Distance: 5
PLA Default White Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with Pitch Black
At layer #6 (0.56mm) swap to Nuclear Red
At layer #10 (0.88mm) swap to Yellow
At layer #13 (1.12mm) swap to Nuclear Red
At layer #15 (1.28mm) swap to White
At layer #18 (1.52mm) swap to Yellow
At layer #20 (1.68mm) swap to White
At layer #28 (2.32mm) swap to Nuclear Red for the rest.