Summary

Made to hold a micro Fpv camera on a 713maker Standard Carriage
slots under stepper motor and is held in with stock 713maker screw

I used the Runcam micro eagle because it's small/light and has a m12 lens
I swaped it to a m12 f8.0mm for the correct zoom
I have been using this setup for about 6-8 months with no problems
Is being used with a servo controled video Switcher for programed/macro multi feed goodness

Comments or questions are welcome!

Print Settings

Printer Brand:

Monoprice

                                            Printer:                      
Maker Select Plus

Rafts:

                                            Supports:                      
Yes

Resolution:

                                            Infill:                      
25

Filament: amazon Petg
Black

                    
                        Notes:                     
Camera used:
https://www.amazon.com/RunCam-Micro-Eagle-Camera-800TVL/dp/B079NT11JJ/ref=sr_1_4?crid=2R09P9F6RJQI8&keywords=runcam+micro+eagle&qid=1577690852&sprefix=runcam%2Caps%2C214&sr=8-4
Lens used:
https://www.amazon.com/Board-Black-Security-Surveillance-Camera/dp/B01MDTOU9C/ref=sr_1_2?keywords=m12+lens+8.0mm&qid=1577690808&sr=8-2
3 Channel Video Switcher used:
https://www.amazon.com/Kangnice-Channel-Switcher-Module-Switch/dp/B071VT5TXK/ref=pd_sbs_421_5/137-6495441-9282956?_encoding=UTF8&pd_rd_i=B071VT5TXK&pd_rd_r=b4e719e9-fe95-4e87-bff5-7302d8eb8f03&pd_rd_w=iZlg6&pd_rd_wg=pcpyn&pf_rd_p=7c0dad87-8a25-4c4f-9349-026039ea6cb3&pf_rd_r=ZAPVQ73NB6CACXK01Z68&psc=1&refRID=ZAPVQ73NB6CACXK01Z68