As apparently they like the painting style I created for the Super Mario characters. This time I bring you another of my favorite characters Pikachu.
I hope you also like it and share your remixes, because this model has very good results with a wide variety of colors.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Protopasta Black Transmission Distance: 0.5
PLA PolyLite Starlight Neptune Transmission Distance: 1
PLA PolyLite Temp Purple-Pink-Translucent (Med) Transmission Distance: 10
PLA Kexcelled Fluorescent Yellow Transmission Distance: 8
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Starlight Neptune
At layer #14 (1.2mm) swap to Temp Purple-Pink-Translucent (Med)
At layer #19 (1.6mm) swap to Fluorescent Yellow for the rest.