Made an optical illusion of my hopefully “soon to be” car. Skoda Enyaq RS.

I made mine in the Mamba Green but Raze blue might be more of your jam? No sweat!

You can change the 2 last colorshifts in to what ever color you would like and still keep the overall same look.

Settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 0.3
PLA Fiberlogy Inox (Silver) Transmission Distance: 3
PLA Fiberlogy Green Transmission Distance: 6
PLA Fiberlogy Yellow Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Inox (Silver)
At layer #15 (1.28mm) swap to Green
At layer #22 (1.84mm) swap to Yellow for the rest.