Universal - WAGO Screw Capped Containers by tgsparky77

tgsparky77

Hobby & DIY>Electronics

Print Profile(10)

All

X1 Carbon

P1S

P1P

X1E

1 of every WAGO Cap PLA 0.2mm layer, 4 walls, 15% infill

Designer

1.9 h

1 plate

4.8(14)

100mm Container PETG 0.2mm layer, 4 walls, 15% infill

Designer

1.3 h

1 plate

5.0(7)

1 of every WAGO Cap PETG 0.2mm layer, 4 walls, 15% infill

Designer

2 h

1 plate

5.0(5)

50-100-150mm Containers PLA 0.2mm layer, 4 walls, 15% infill

Designer

2.5 h

1 plate

5.0(5)

Click to see more

Boost

155

245

300

Released

Description

I designed these last year for other things but thought I'd make some caps so I can identify which WAGOs are in them with dots representing the 2,3 and 5 WAGOs. They are 50mm, 100mm and 150mm tall with the caps on and the containers are 40mm in diameter

I also added in the files a plain cap and caps with just WAGO on them. I have also got 3 types of wall mount holders (see my page or the link below)

I've made profiles for PLA or PETG. I wouldn't print anything bigger than 0.2 on the threads. Also it would be best to print in at least PETG incase you drop them. The ones I designed over a year ago in PETG are still great after being dropped at work a ton of times.

Check out my other case WAGO accessories

https://makerworld.com/en/models/64771#profileId-67997

https://makerworld.com/en/models/44836#profileId-52896

https://makerworld.com/en/models/59144#profileId-61186

https://makerworld.com/en/models/51634#profileId-53359

Enjoy

Comment & Rating (51)

@morpheus61

Boosted

Print Profile

100mm Container PETG 0.2mm layer, 4 walls, 15% infill

Really nice design ! Thanks !

The designer has replied

@tgsparky77

Glad you liked them. How did the threads turn out? I've printed a heap with different layer thickness and filament type and they were all great but thats only on one machine.

@morpheus61

Boosted

Replying to @tgsparky77 :

They also turned out perfect with your profile. Running smooth and "feeling" solid. Printed with extruder PETG black, the orange is BambuLab PETG.

(Edited)

@MrABCreations

Print Profile

50-100-150mm Containers PLA 0.2mm layer, 4 walls, 15% infill

awesome containers works great

@MicRas

Print Profile

50-100-150mm containers PETG 0.2mm layer, 4 walls, 15% infill

The designer has replied

@tgsparky77

The green looks great

@HotnSpicy

Print Profile

1 of every WAGO Cap PLA 0.2mm layer, 4 walls, 15% infill

der P1S hatte mit diesem Profil leichte Probleme das Gewinde sauber zu drucken. Bei fast allen Gewindegängen an der Stelle des geringsten Durchmessers war die Haftung nicht optimal. Nach vorsichtigem zu und wieder aufschrauben konnten die beiden Gewinde dann auf einander eingeschliffen werden.

The designer has replied

@tgsparky77

Sorry to hear you are having issues with this profile. I have printed at least 20 of the containers and all of them work great everytime. If you haven't calibrated your filament etc this could cause a issue or even your filament. You are the first person from 435+ dowloads that have mentioned an issue. It could be something thing simple on your printer. One thing about 3D printing is its not perfect on every printer, even the same model of printer. Also evey printer unless calibrated will have slight different tolerances. You should test your printer with a tolerance test model. Try this one https://makerworld.com/en/models/107896#profileId-115190. EVERY printer I have owned I run a test like this to see if I need to calibrate it or not. If you can't move the 0.15 then the threads may not work.

@HotnSpicy

i don’t thinking’s a calibration issue. in the picture you can see I can move them up to 0.10 perhaps the second picture shows what I mean. at the bottom the strings separate from the side of the cap. that happens also during the whole thread

(Edited)

@tgsparky77

Replying to @HotnSpicy :

Thanks for the photo it helps. Try dropping the layer height to 0.16 or lower to get more detail on the treads. For the cylinder you can adjust the the layer height for the threads only and leave the cylinder part at 0.2 or more.

@brendan.pisani

Print Profile

1 of every WAGO Cap PLA 0.2mm layer, 4 walls, 15% infill

Easy print that makes grabbing my wago's much neater

@HotnSpicy

Print Profile

50-100-150mm Containers PLA 0.2mm layer, 4 walls, 15% infill

sauberer Druck jedoch leichter Farbunterschied als in der Höhe inzwischen das erste kurze Teil fertig war

(Edited)

The designer has replied

@tgsparky77

If you are talking about the slight change in colour due to the change in flow and speed that will all depend on your filament type, brand and colour. I only print with PETG-CF when printing things I want to look nice as the speed and flow have no affect on the surface finish.