Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

DO NOT SCALE Z-AXIS

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.2
PLA BambuLab Matte Marine Blue Transmission Distance: 0.4
PLA BambuLab Matte Dark Blue Transmission Distance: 0.1
PLA BambuLab Basic Blue Transmission Distance: 2.9
PLA PolyLite Pro Dark Purple Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 3.8
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA Polylite Cold White Transmission Distance: 0.8
PLA BambuLab Basic Desert Tan Transmission Distance: 0.7
PLA BambuLab Basic Yellow Transmission Distance: 4.8
PLA BambuLab Basic BambuLab Green Transmission Distance: 1.2
PLA BambuLab Basic Cyan Transmission Distance: 1.9
This print uses 12 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Marine Blue
At layer #10 (0.88mm) swap to Dark Blue
At layer #12 (1.04mm) swap to Blue
At layer #13 (1.12mm) swap to Dark Purple
At layer #14 (1.2mm) swap to Black
At layer #16 (1.36mm) swap to Dark Blue
At layer #17 (1.44mm) swap to Red
At layer #22 (1.84mm) swap to Mandarin Orange
At layer #23 (1.92mm) swap to Cold White
At layer #25 (2.08mm) swap to Desert Tan
At layer #26 (2.16mm) swap to Mandarin Orange
At layer #28 (2.32mm) swap to Yellow
At layer #31 (2.56mm) swap to BambuLab Green
At layer #33 (2.72mm) swap to Cyan for the rest.