这是一个经济且取用方便的耗材存储方案。

需要事先购买娃娃收纳桶（公仔玩偶收纳神器） 直径 26cm，高度50cm(太高的话取出不方便)。

第一步：将买来的收纳桶组装好。

第二步：将收纳桶的接缝处用透明胶带进行密封，可以内外都粘一下，尽量保证不要漏气。

第三步：将支撑环放入桶内，顶部和底部各放一个，桶的中间可以看情况，可放可不放。

第四步：将底部支撑环（稍微厚一点那个）和收纳桶的盖粘接在一起，也可以使用自攻螺丝。

第五步：将干燥盒放入干燥剂之后组装起来，放入桶内。

第六步：可以愉快的将暂时不用的耗材放入桶内了，记得盖上上盖。

This is an economical and convenient filament storage solution.

You need to purchase a doll storage bucket (a storage tool for stuffed toys) in advance, with a diameter of 26cm and a height of 50cm (if it's too tall, it will be inconvenient to take out the filaments).

Step 1: Assemble the purchased storage bucket.

Step 2: Seal the seams of the storage bucket with transparent tape, applying tape both inside and outside to ensure it is as airtight as possible.

Step 3: Place the support rings inside the bucket, one at the top and one at the bottom. Depending on the situation, you may or may not place one in the middle.

Step 4: Attach the bottom support ring (the slightly thicker one) to the lid of the storage bucket. You can also use self-tapping screws.

Step 5: Assemble the desiccant box after placing the desiccant inside, then place it into the bucket.

Step 6: You can now happily store the filaments you are not using in the bucket. Remember to put the lid on.