I designed this mount from scratch in Onshape.

Sometimes you need the charger to mount off the wall to compensate for the depth of your power point. So I created a standard mount, 3.5cm offset mount and 7.5cm offset mount.

Because the 7.5cm offset may have some extra sideways force on it, I included a 4 screw option.

Recommended settings:

• Print with PETG as this needs to be strong and withstand heat.
• Solid Infill
• 0.2mm layer height
• no supports

My Print:

• On Bambu X1C I used 0.2mm Strong profile
• No Brim
• On textured PEI plate

Designed for countersink, 8g (~4.2mm) screws.

STEP files included.