Magic Mouse Dock (v2)

NOTE: This model is designed to accommodate the Apple Lightning to USB Type-A and USB Type-C charging cable.

Designed for the Apple Magic Mouse to dock on and charge. I used the OEM Apple Lightning to USB-A&C cable that fits very snug. The dock itself has a cable channel and cover to feed the USB charge cable underneath. On either side of the cable channels is a recess to apply foam double sided tape (max width 13mm) in order to secure the dock to flat surfaces.

I have included two different designs to choose from, a floating design and a look through design.

The tolerance for each fitting is very snug in order to secure each part effectively. I have only tested the print profile with Bambu Labs PLA filaments with consistent results.

Machine Configuration -
Printer: Bambu Lab P1S
Plate: Textured PEI Plate
Hot end: 0.4mm hardened steel nozzle
Filament: Bambu Labs PLA

My Process settings for this print
0.16mm High Quality- Default with the below changes -

Support-
Enable Support - Checked
Type - Normal(auto)

Others-
Brim type - No-brim

Visit my YouTube channel for guidance on assembly - 

USB-A
https://youtu.be/0Y6qBpH0HM0

USB-C
https://youtu.be/0dDQDBDuWig