Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Ivory White Transmission Distance: 2.1
Swap Instructions:
Start with Charcoal
At layer #13 (1.12mm) swap to Dark Brown
At layer #15 (1.28mm) swap to Ash Gray
At layer #22 (1.84mm) swap to Ivory White for the rest.
Size: 200x105mm
Featuring Beatrice from Warrior Nun, this piece was created using HueForge.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.