Edited a manga panel to make it more detailed and used HueForge to generate the STL file.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
The Model is 200mm in height.
Filaments that I used:
PLA PolyTerra Charcoal Black
PLA PolyTerra Cotton White
Swap instructions with no AMS:
Start with Black
At layer #8 (0.72mm) swap to White for the rest.
The no-AMS print profile should include the pause needed to swap filament.
The AMS print profile should just change the colors by itself at the required layers.