A simple earplug (or whatever!) container to toss in your center console, toolbox, range bag, or pocket. Holds 4 pairs of most ear plugs without squishing them. Always a good idea to have a few pairs on hand, or for if some friends need them. There's a few different lids available, as well as two different bottom halves for whatever style you like. The ones with designs on them have the color depth to 0.8mm, so 4 layers if printing at 0.20 layer height. This should hopefully prevent colors from showing through if using a lighter color filament on the designs.

I've only printed this in PLA so far, but the thread tolerance should be fine with PETG/ABS/ASA as well.

If launched from the site, you should be able to change color 1 and 2 for the AMS if using bambustudio. If using anything else and bringing in the 3mf's, use your object tree to color the image/text.

**If bringing in the 3MF files directly into the slicer, DO NOT click yes on the popup for resizing to metric. The slicer is detecting that a portion of one of the letters is too small, and it will make it unreasonably large.**

The color most likely won't show up until you hit slice and rotate to the back of the sheet, or move the slider to the first layer!!

Please share your color combos if you come up with something unique!