Harry Potter Magic Compass

Unleash your inner wizard with this fully functional Harry Potter Magic Compass! Perfect for Harry Potter fans and makers alike, this unique compass combines practical navigation with a touch of magic from the wizarding world.

Features:

• 100% Working Magnetic Compass: This compass is not just a decorative piece; it's fully functional, helping you find your way just like any traditional magnetic compass.
• Unique Design: Instead of a traditional compass, this design features the iconic Deathly Hallows symbol, adding a magical twist to your navigation tools.

Parts list:

1. Printed parts
2. Two round neodymium N35 magnets: 4mm diameter x 2mm thick

Assembly Instructions

Below it is a video of the assembly but please take special attention to the three topics below

1. The piece that holds the magnets is very small and I had to use brim… please make sure you not only remove the brim but cut all the excess otherwise the needle will not fit.
2. the orientation of the needle is important and is linked to the magnets orientation. Test it like I show in the video and if the N is facing south you just remove the needle rotate it 180º and place it.
   (If you don't know where north and south is you can use for example google maps and/or a free phone compass app)
3. The tip of the magnets holder must be as sharp and straight as possible so that it creates the best effect and doesn't get stuck

Note: I didn't use but for a more permanent build you can apply a bit of glue in the pointer, magnets and border

Calibration

All pieces snap together. If that is not the case for you (either doesn't fit or too loose), please I suggest to calibrate your printer or check filament.

Happy printing and you like my designs please consider supporting me by rating, boosting and share your prints :)

╭─━━━━━━━━━━━━━━━━━━━━─╮
Buy me a ☕️ or a 🍺
https://www.buymeacoffee.com/dpjrodrigues
╰─━━━━━━━━━━━━━━━━━━━━─╯