Project: merryl final.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 141.89x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.1
    PLA BambuLab Basic Blue Gray Transmission Distance: 1.5
    PLA Sunlu Meta Grey Transmission Distance: 2.1
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #8 (0.8mm) swap to Blue Gray
    At layer #14 (1.28mm) swap to Grey
    At layer #17 (1.52mm) swap to Ivory White for the rest.