Why

Rack servers are great if you have a big rack to hang them in, but if you don't, you have to improvise.

Also includes a little spacer for the top of the servers.

It works fine for me, but use at your own risk.

Features

• No supports needed
• Holds 2 standard 1u (1.75"/44.45mm) size servers, vertically
• 200mm maximum width, should fit most printers

Instructions

• .25mm layer height is fine
• No supports needed
• Print on its side for better strength
• Use a minimum of 3 or 4 walls and 10% infill

Open Source

As always the original design file (fusion360 + STEP) is included, so feel free to improve it (or learn from it)!