Simple blocks to be screwed to your sacrificial board, giving a straight vertical edge to but any templates up to.

This ensures the templates are placed in exactly the same place each time to engrave something.

Especially useful if you have a honeycomb bed, or a simple cake stand you place on top of the sacrificial bed ie

1. Plywood to Cut (on top)
2. Cake stand (to hold plywood off the sacrificial board to give a cleaner looking cut / burn)
3. Sacrificial Board (To catch overturn through the plywood while cutting).
4. Base board (with these blocks screwed down - at the bottom).

Using this ‘sandwich’, you can simply push everything up to the blocks on 2 axis ie x and y and the template / work piece on top can always be placed in the same spot each time.

The block measures:-

• 40mm High
• 40mm Wide
• 30mm Deep

I hope this is some use to you.

Please ‘Like’ and download to help me continue to share these models.