敬请见证：艾尔登法环 最美植物 托莉娜

Elden Ring trina

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 116.4x140mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Hatchbox Purple Transmission Distance: 2.6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Purple
    At layer #13 (1.12mm) swap to Jade White for the rest.