Project: Spiderman Miles Morales 6.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

If changing size . . . only change X and Y, not Z.

The Model is 154.08x240.32mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.2mm and the Actual Depth is 3.3mm

Filaments Used:
PLA Creality Black Transmission Distance: 0.6
PLA BambuLab Matte Red Transmission Distance: 4
PLA BambuLab Matte Mandarin Orange Transmission Distance: 5
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Red
At layer #24 (2mm) swap to Orange
At layer #29 (2.4mm) swap to White for the rest.