Panther Hueforge

See the .gif for step by step color switch by layer. (Language is Dutch)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x86.53mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.4mm and the Actual Depth is 1.1mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG Kingroon Orange Transmission Distance: 9.5
PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #8 (0.72mm) swap to Orange
At layer #11 (0.96mm) swap to White for the rest.

Do you like my work? Share it with others or give a like/boost.
Take a look at my other uploads.