Christmas Tree Decoration
Remixed by
Boost
81
148
69
Print Profile(3)
0.28mm layer, 2 walls, 10% infill
Designer
57 min
1 plate
140% Scale 0.28mm layer, 2 walls, 15% infill
Designer
1.3 h
1 plate
125% Scale 0.28mm layer, 2 walls, 15% infill
Designer
1.3 h
1 plate
Boost
81
148
69
0
293
432
Released
Description
Christmas tree I saw about 8 years ago. Wanted to make something along the same lines.
Print at Different Scale to test and have fun. I've uploaded profiles for 100%, 125% & 140%
Turn Aux parts fan off!!
One of the members printed it in Bambu Labs PLA Sparkle green and it looks really good
Comment & Rating (69)
All
BBL green sparkle
The designer has replied
2
Reply
That is so cool!! What filament did you use? It looks like you scaled it. How much bigger do you scale it?
(Edited)0
Reply
I used Bamboo Labs sparkle green. Scaled at 100%, 120% and 140%. I also turned the part fan down to 40% and chamber and aux to 10%.
(Edited)0
Reply
Replying to @jgresso
Yes. I thought I mentioned you need to turn the Aux part fan off. I'll check and mention that.
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Could be little more dense.
Fun print!
The designer has replied
1
Reply
Use the 140% Profile or scale the raw model to 140%. It's much thicker.
(Edited)1
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Expected them to look a bit better based on the pictures povided but they still look alright
The designer has replied
0
Reply
The 125% and 140% look much better. That's what is in the photos. I should have scaled the original.
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Hammer habe nicht gewusst dass sowas geht
1
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Thanks for the file.
It works. 😍
1
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
like it
0
Reply
Print Profile
140% Scale 0.28mm layer, 2 walls, 15% infill
Perfect! Thx!
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
so fun! they turned out great!
0
Reply
Print Profile
125% Scale 0.28mm layer, 2 walls, 15% infill
These come out great, I got the green perfect first try but the others I didn’t modify my filament settings to turn off aux fan. I should have but I’ll probably be printing several of these this winter so I’ll save my own profiles with that setting.
0
Reply
Print Profile
140% Scale 0.28mm layer, 2 walls, 15% infill
Excellent trees! Printed four of these!
1
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld