Pain - naruto Hue Forge.

For 0.4mm nozzle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #14 (0.68mm) swap to Red
At layer #24 (1.08mm) swap to Yellow
At layer #38 (1.64mm) swap to White for the rest.