Winnie the pooh bookmark.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 6.1
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #18 (1.52mm) swap to Sakura Pink
At layer #23 (1.92mm) swap to Yellow
At layer #24 (2mm) swap to Ice Blue for the rest.