Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. You can change X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 6 unique filaments. Substitute as you see fit.
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #11 (0.96mm) swap to Dark Brown
At layer #12 (1.04mm) swap to Gray
At layer #15 (1.28mm) swap to Jade White
At layer #18 (1.52mm) swap to Dark Brown
At layer #21 (1.76mm) swap to Yellow for the rest.