A quick and simple print to optimize usage of the Sunlu Mini Air Purifier within a P1S or X1C chamber when printing smelly or VoC emitting plastics like ABS/ASA.

The duct is designed to have the Sunlu Air Purifier placed in upside down for better airflow of hot air in from the top, and out at the bottom. This solves any issues with throwing cooler air out at your print bed and part, thus improving print quality while keeping smells and VoC's lower.

If you'd prefer to have it upright, it also works perfectly well as a simple stand.

If you would like to use 2 at a time, make sure to leave a gap between air purifiers to allow good flow in from the sides (or rotate the purifiers so one of the side vents faces the print bed).

Prints without any supports standing straight upright.

If printing in ABS/ASA, supports may be needed for the bridge/overhang just above the lower outlet.

If printing with PETG, no supports should be needed at all.

For a nice look, use a contrasting color for the top face (and in the gaps of the text).

Should fit any air filter with a size of 46mm x 46mm, and radius/fillet of 6mm or more.