the Tie clip

interchangeable (0.2mm print profile) / 0.4mm is possible (but not as clean)

designed for the wedding competition

find the clip at the raw data (stl download)

Apart from the wedding, what could be better than the big party afterwards? This tie pin not only serves as an accessory, but also as an icebreaker.

In addition to the variations I have created, you can also use the STL file "Connector" to create your own designs with your favorite CAD program.

The sword attachment serves as an example here.

All print profiles were printed with a 0.2 nozzle due to the curved letters.

In the print profiles, the wall thickness changes to 8 for the areas to be printed in the overhang to avoid free-floating infill. ( see photos )

(after the text modules)

This should be considered when creating your own profile.

I hope this inspires a few tie enthusiasts to develop their own variations.

As always, I welcome feedback, photos and comments.

As there is always a lot of drinking at weddings (at least at the ones I have attended so far) here is the link to: "hold_my_beer"

https://makerworld.com/en/models/470253#profileId-379728

Cheers!