Here is my first 3D model upload, I hope you'll like it!

If you you do, smash the like button or let me a boost <3

• Layer 0.08mm.
• Base and shaft are on the same bed, both at 100% infill for stability, more weight in the bottom part and more resistance in the shaft. 
• V8 is flat on one side for simplicity of the printing.
• Printed in black and white PLA Basic from Bambulab on a X1C.

V8 :

• 10% Gyroid infill.
• Economic on filament changes for multicolor.

If you want to print it on your own, here is my recommendations:

• The Base: Print it with 100% infill if you need more stability, as it will lower the mass center.
• The Shaft: Add some support to the mid section for stability on print.
• The V8: For the simplicity of printing I made the bottom side flat, but it have a micro height difference for easy painting.

The adaptative layer height work well on the models, I recommend using 0.08mm for the threads.