Search models, users, collections, and posts
Stackable Trellis
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
3.7 h
1 plate
0.2mm layer, 2 walls, 15% infill
1.4 h
1 plate
0.2mm layer, 3 walls, 25% infill
1.3 h
1 plate
Open in Bambu Studio
Boost
177
521
66
37
520
395
Released
Description
Requires supports on the “spike” parts at the bottom of the model, but otherwise not too complicated to print. If you print multiple then you can slide them together easily to get extra height.
Total model dimensions are 205mm from the end of the spike to the top of the trellis, and 200mm wide at the top segment, so this should fit on any standard-sized printer bed. The spike portions are 60mm long, so each trellis in the stack gives 145mm of height.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (66)