Bist du auf der Suche nach einem perfekten Schutz für dein Arduino R4 Minima oder dein Arduino R4 WiFi Board? Dann habe ich genau das Richtige für dich! Mein neues Snap-Fit Hardcase ist die ultimative Lösung, um dein Board sicher und stilvoll zu verpacken.
Das Beste daran? Du kannst das Case ganz einfach zusammenklipsen! Alle Anschlüsse bleiben komplett zugänglich, sodass du problemlos auf alle Ports zugreifen kannst. Und natürlich sind auch alle LEDs von außen sichtbar.
Dein Board wird mit vier M2x4 Schrauben in der unteren Hälfte des Gehäuses befestigt. Und für noch mehr Komfort: Du kannst den Reset-Button des Boards von außen über einen praktischen Taster drücken – kein nerviges Öffnen des Gehäuses oder fummeliges Rumstochern nötig!
Das Snap-Fit Hardcase bietet dir also Schutz, Funktionalität und jede Menge Komfort in einem.
Are you looking for the perfect protection for your Arduino R4 Minima or your Arduino R4 WiFi Board? Then I have just the thing for you! My new Snap-Fit Hardcase is the ultimate solution to keep your board safe and stylish.
The best part? You can easily snap the case together! All the ports remain fully accessible, so you can easily reach them. And of course, all the LEDs are visible from the outside.
Your board is securely fastened in the bottom half of the case with four M2x4 screws. And for added convenience: you can press the reset button on the board from the outside with a practical button – no more annoying case opening or fiddling around!
The Snap-Fit Hardcase offers you protection, functionality, and lots of convenience in one package.