Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 130x185.98mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Army Brown Transmission Distance: 0.3
PLA PolyTerra Pastel Peach Transmission Distance: 3.5
PLA PolyTerra Cotton White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Brown
At layer #11 (0.96mm) swap to light orange
At layer #15 (1.28mm) swap to Cotton White for the rest.
Enjoy
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.