MINI version filament transmission distance meter for Hueforge by XtronchO.
** In this version, improvements have been added with respect to the previous one, such as a screen held with screws and a case with a closure with screws instead of pressure**
******* FREE PROJECT *********
With this system you can instantly obtain the TD (Transmission Distance) value of your filaments (approximate values) to enter them into your Hueforge program and thus obtain better quality prints (minimum value 0.8-1)
List of necessary materials:
1 - Arduino Nano
1 - OLED 0.96 128x64 BLACK 26x26mm
1 - TSL2561
1 - Led 2835 5v 6500k (RESIST 100 OHM)
8 - Heat insert nut m3 x 4.2 x 4
2 - M3 x 4 Screw
1 - M3 x 6 Screw
3 - M3 x 10 Screw
2 - M3 x 12 Screw
1cm Double-sided tape 1 mm
33.4 gr PLA Black
1.6 gr PLA White
Assembly instructions in the photographs.
***FREE program code*** Currently only available to users who request it.
*** PRINT PROFILE: This with a layer height of 0.1. This height is only mandatory in the interior piece (bed 2), so the other pieces (bed 1) can be printed at a layer height of 0.2
Medidor version MINI de distancia de transmisión de filamento para Hueforge por XtronchO.
** En esta version se han añadido mejoras con respecto a la anterior como pantalla sujeta con tornillos y caja con cierre con tornillos en lugar de a presión**
******* PROYECTO GRATUITO *********
Con este sistema podrás obtener de manera instantánea el valor de TD (Distancia de Transmisión) de tus filamentos (Valores aproximados) para introducirlos en tu programa Hueforge y así obtener impresiones de mejor calidad(valor minimo 0.8-1 )
Lista de materiales necesarios:
1 - Arduino Nano
1 - OLED 0.96 128x64 BLACK 26x26mm
1 - TSL2561
1 - Led 2835 5v 6500k (RESIST 100 OHM)
8 - Tuerca de inserción de calor m3 x 4.2 x 4
2 - Tornillo M3 x 4
1 - Tornillo M3 x 6
3 - Tornillo M3 x 10
2 - Tornillo M3 x 12
1cm Cinta doble cara 1 mm
33.4 gr PLA Negro
1.6 gr PLA Blanco
Instrucciones de montaje en las fotografias.
*** Codigo del programa GRATUITO*** Actualmente solo disponible para los usuarios que lo soliciten .
*** PERFIL DE IMPRESIÓN: Esta con una altura de capa de 0.1. esta altura solo es obligatoria en la pieza interior (cama 2), por lo que las demás piezas (cama 1) podeis imprimirlas en una altura de capa de 0.2