This is a spinning fidget shaped like a planet. It is completely print-in-place, no tinkering required. The only specified print settings that must be on are Supports, but they should be touching just the build plate, if you are using the STL as your model. 

In CURA, this setting is called Support Placement. Select Touching Buildplate and you should be good to go. In Bambu Studio this setting is called Supports: Only on build plate. Check that box. 

There are 2 models available. There is the .3mf (attached as a print profile) which has a TON of filament changes and wastes a ton of filament, but in my opinion is well worth it as it makes the model look like Earth if you print in green and blue filament. 

If you want a solid color version or want to do the coloring yourself, there is an STL as well. 

There is another .gcode available on my Printables which has the layers sliced horizontally, resulting in a slightly worse look but a lot of filament saved. The link to the model is: https://www.printables.com/model/840857-multicolor-spinning-planet-fidget