Iron Man Wallart
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Charcoal
At layer #6 (0.56mm) swap to Scarlet Red
At layer #9 (0.8mm) swap to Yellow
At layer #12 (1.04mm) swap to Ivory White for the rest.
Prints as three separate Parts on one Plate as seen on second picture.
If you want only the Logo or only the Iron Man, simply delete the other.
Property Marvel, this is Fan Art.