My version of the poop bucket, to be something innovative, is attached with magnets so that it is always in place.
You need to print the connector and the poop bucket itself.

Magnet size: diameter: 6mm, height 3mm.

If you have a different magnet - write to me and I will adapt the design to your magnet size.

Installer:

• The magnets should be glued into the prepared holes using super glue.
• The connector should be attached to the printer using double-sided tape.
  (Before you stick the double-sided tape, degrease the gluing area on the connector and the printer using, for example: IPA.)