Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x361.58mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
    PLA default black Transmission Distance: 6
    PLA Default White Transmission Distance: 5
    PLA Default yellow Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with black
    At layer #3 (0.96mm) swap to White
    At layer #5 (1.12mm) swap to yellow
    At layer #8(1.2mm) swap to black for the rest.