Snap on (Beer) Can Handle 0.33l, 355ml/12oz, 0.5l by OFF5PRING

OFF5PRING

Household>Other House Models

In Contest

Beach & Pool Essentials

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

0,5l 0.2mm layer, 3 walls, 25% infill

Designer

1.1 h

1 plate

4.0(1)

0,33l 0.2mm layer, 3 walls, 25% infill

Designer

1 h

1 plate

3.0(5)

12oz / 355ml 0.2mm layer, 3 walls, 15% infill

Designer

47 min

1 plate

Open in Bambu Studio

Boost

115

Released

Description

A handle for your canned Drink, keeps your hands warm and your drink cold.

Snap it on from top to bottom.

0.33l and 0.5l Models available.

The feet snaps on with the 45 degree Site First.

Edit: i've added a 12 oz / 355ml version, the fit is not confirmed yet since i cant get the 12 oz cans where i live. It would be very nice if someone could test it and give me some feedback.

Have fun, Cheers!

Comment & Rating (21)

@Big_Totoro

Print Profile

0,33l 0.2mm layer, 3 walls, 25% infill

doesn't fit regular 355 ml cans

The designer has replied

@OFF5PRING

Hi, that is because the version you printed is for the 330ml can. I have the stl files uploaded for the 12 oz (355ml) version but as stated in the description the fit is not verified yet. However i uploaded a printprofile for the 12oz / 355ml version since there is some confusion it seems. Thanks for your comment!

(Edited)

@Big_Totoro

I'll print the 355ml and test the fit later today. I'll post photo's too! thanks for the reply

@OFF5PRING

Replying to @Big_Totoro :

Thank you:)

@Buqqz

Print Profile

0,33l 0.2mm layer, 3 walls, 25% infill

Not tall enough.

The designer has replied

@OFF5PRING

Thanks for your make and the comment. It Looks like you need to Print the 12oz/355ml Version. You printed the 330ml version which fits the slightly smaller cans in Europe.

@Buqqz

Looks like I switched profiles. Printing the correct version now. I will update.

@Big_Totoro

This is feedback for the fitment of the 355 ml can. It does not fit properly at the bottom. I have attached some close up photos of the area that don't fit. looks mostly likely the fitment issue is caused by the radius on the handle side at the bottom. @OFF5PRING

(Edited)

The designer has replied

@OFF5PRING

Thank you very much for your effort and the feedback. I placed a radius in the corner there should now be enough room for the can.

@admichaus

This model does not fit US cans

The designer has replied

@OFF5PRING

I added an 12 OZ version but i have no can to check the fit. You can download the stl files. It would be really nice if You can give some feedback. Thx

@Ihimaging

Replying to @OFF5PRING :

The 12oz US can version does work. There is a slight gap between the bottom edge where it mates with the can. Great design!

@OFF5PRING

thx a lot i will widen it a bit this evening

@edwynmunar

Print Profile

0,33l 0.2mm layer, 3 walls, 25% infill

Other Issues:The design is wrong, the small size doesn't fit a normal can so I don't know what type of can it was designed for, there are only two types, large and small and the small one doesn't work.

The designer has replied

@OFF5PRING

the design is for european sizes (0,33 l and 0,5 l), the us version is still under testing, if You want give it a try please download the stl files. I will add a printprofile for the 12oz size when the fit is confirmed. thx for your feedback

(Edited)