料太多用不完，刚好最近开到了春丽手办，再画一个用于手办摆件等的置物架。

整体厚度为5mm，也有6mm版本，实测5mm强度放手办就足够了。

每层高60，宽70，模型整体宽240，可以根据自己模型按需选择。

采用的支撑还没有拆（根据个人需求拆除），目前我用来放置测试模型小船，小船侧摆在支撑上大概可以放15个。

I have too much material and can't use it all. Meanwhile, I recently got a Chun-Li figurine. I'm planning to make a display shelf for the figurine and other items.

The overall thickness is 5mm, with a 6mm version available as well. Based on practical tests, 5mm is strong enough to hold the figurine.

Each layer is 60mm high and 70mm wide, with the overall width of the model being 240mm.

The supports have not been removed yet (you can remove them based on personal needs). Currently, I'm using it to place a small test boat model. When the boat is placed sideways on the support, it can hold about 15 boats.