SecurityDog

0.16mm layer, 2 walls, 20% infill

Miroslav

yury.saakov

Isix

Low Infill, less filament

Excellent model, thank you. I did use supports on my A1, and they came away sweetly. This is the way.

peter051151

Steffen Döhler

Flyrockets

printed great. Thought I had some silk chrome lying around but when I found the roll there wasn’t enough to print the model with. Instead I just used this polymaker silver silk that has been sitting out for over a year and let her rip to see what the model would come out like. Surprising enough it printed amazing even with the old filament. 

Geek Genius Collective

daniel.scherzl

great design, looks really good with multicolored filament 

Hans

Encrust3d

cover

mando grogu.webp

plate_1.png

.16mm layer height, 2 walls, 20% gyroid infill. No supports needed.

Low Infill, less filament, faster print. Same settings as previous profile, less infill to speed up the pprint and use ~30g less filament.

mando.webp

latent

I love this model but the 20% infill and print profile was a bit long and used a lot of filament for my purpose of putting it on my shelf and just looking at it - this profile is .16mm layer height but with 5% infill and a few other tweaks like infill combination to get a print under 4.5 hours and under 90g of plastic.

0.16mm layer, 2 walls, 5% infill

Mando1.webp

Mando2.webp

Mando3.webp

Mando4.webp

Coke2709

Painted Model with 4 ColorsUsed:Bambu PLA Matte Grey for the BaseBambu PLA Metal Iron Gray Metallic for the BodiesBambu PLA Metal Cobalt Blue MetallicBambu PLA Metal Oxide Green Metallic

Multicolor - 4 Colors - 0.16mm layer, 3 walls, 20% infill

plate_1.webp

Bummelz

0.2mm layer, 2 walls, 20% infill

PXL_20240424_212100966_ccbf406f-9144-4a1e-b498-5ebe2434a8d0.webp

Adrigarro

I made some adjustments to be printable on A1:0.6mm nozzle&nbsp;0.18mm layer&nbsp;2 walls10% infill (maybe you could put less like 5%)No supports (the geometry does the work)&nbsp;In the photo maybe you san see some issues, that's because I made a timelapse smooth video and I removed the purge tower (don't be like me).There are some strings too so maybe adjust &nbsp;a little your retractions (but it isn't so relevant IMO).

0.6mm nozzle, 0.18mm layer, 2 walls, 10% infill

3Dennis

Mandalorian Figurine | No Supports

Baby Yoda ( Grogu ) Easy Print

Mandalorian figurine remixed to add Grogu, and still prints without supports needed. For the remix, I increased the base size, combined and added Grogu, added a few crystals to support Grogu's hands, and used meshmixer to mesh the crystals with the base. I printed .16mm layer height with polyterra pla, no supports needed.

Mandalorian and Grogu Figurine - no supports

Global

Print Profile(6)

Description

Comment & Rating (148)

This remix is based on

License

Related Models

Mandalorian and Grogu Black and White

Mandalorian Mobile phone stand

IG-12 and Grogu

Mythosaur Skull Mandalorian