This was intended to be a bookmark but it got kinda wide. I stuck magnetic tape on the back and now its a refigerator magnet.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 111.34x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue
At layer #10 (0.88mm) swap to Lilac Purple
At layer #12 (1.04mm) swap to White for the rest.