Description:

I have designed a poop slide, which can be screwed directly to the printer. For this you need the same screws that are used for the spool holder. For the installation just look at the pictures to see which screws need to be removed and screw the already assembled poop slide + slide holder to the printer with the screws of the spool holder.

Be careful which box you print, as there are three different sizes and two different designs. One version is for printers that still have the original feet installed. The other version is for printers that have the anti-vibration feet installed.

Printing settings:

Poop Slide:

-Layer height: 0,2

-Activate ironing

Slide Holder:

-Layer height: 0,16mm (Because of the overhangs)

-Infill: 35%

-Print with supports

Boxes:

-Layer height: 0,28

For the rest you can use standart settings