Hallo zusammen
Hier habe ich ein neues Hueforge für euch. Das Bild habe ich in meinen anfängen der Fotografie geknipst und jetzt zu einem richtig schönen Hueforge umgewandelt.
Wahrscheinlich werde ich im laufe der Zeit mehrere Variationen hochladen. Schaut gerne immer mal wieder vorbei.
Das Bild hat eine Größe von 200x200, wenn ihr es in 150x150 oder 100x100 haben möchtet, dann könnt ihr mich sehr gerne anschreiben.
Achtung: Bitte nicht Skalieren, sonst passen die Einstellungen nicht mehr!!!
Achtung: Wenn du eine andere Farbe wählst, bitte neu slicen, das es übernommen wird.
Ich hoffe euch gefällt mein Hueforge
Über ein Like oder Kommentar würde ich mich sehr freuen :)
Bitte beachten:
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to RedAt layer #17 (1.44mm) swap to White for the rest.
--------------------------------------------------------------------------------------------------------------
Hello everyone
Here I have a new Hueforge for you. I took the picture when I was just starting out in photography and have now converted it into a really beautiful Hueforge.
I'll probably upload more variations over time. Please check back often.
The picture is 200x200, if you want it in 150x150 or 100x100, then you are very welcome to write to me.
Attention: Please do not scale, otherwise the settings will no longer fit!!!
Attention: If you choose a different color, please re-slice it so that it is adopted.
I hope you like my Hueforge
I would be very happy about a like or a comment :)
Please note:
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to RedAt layer #17 (1.44mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.