Model Instructions

Please do NOT adjust the size in your slicer, as this will affect the layer alignment.

Avoid resizing the model, as it can cause errors in color changes and compromise the entire print. To achieve the desired results, use my print profile.

This model can be printed safely without AMS and on any printer.

I hope you enjoy it! If you want to support me, please leave a like and rate it five stars. Thank you!

• Nozzle 0.4
• Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Red Transmission Distance: 2.4

PLA PolyLite White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Red
At layer #16 (1.36mm) swap to White for the rest.