Hello, this is the Adjustable fully-printable modular system with which you can create a holder for your workshop tailored to your needs. For example, you can build a bracket for soldering, a bracket for painting miniatures, a vise and much more! If you have a suggestion for improvement, feel free to leave a comment. I will be glad for any feedback. You can also show which holders you have built and inspire others!
Vise
The Ultimate holder
The consoles are the main parts of this system. They have three different sizes: short console, medium console and long console. One thread stick can be clicked into the short console, two into the medium console, and three into the long console. You can freely combine right-hand thread sticks and left-hand thread sticks. There are threads at the end of the consoles that allow the consoles to be screwed into the rotating connector.
The legs are used to keep the holder standing on the table. They slide onto the console and have holes in them for attaching to the table top.
There are two types of connection sticks: normal connection stick and free connection stick. Connection sticks are used to connect individual thread sticks to each other. The normal connection stick is also used to connect the thread stick and rotating handle. The free connection stick is used additionally to connect the thread stick and the rotating connector.
There are two types of thread sticks: right-hand thread stick and left-hand thread stick. Thread stick is used to click into the console.
This part is used to rotate with thread stick.
You can also attach thread stick in console with this part.
You can use RA (right angle) connectors to attach two consoles together. The fixed RA-connector has a thread on both sides so it can be moved around the console using thread stick. The semi RA-connector has a thread only on one side and the free RA-connector has no thread so you can move around console freely.
Rotating connector slides onto the console and can be moved with a thread stick. One end of the console, peg mount, pcb holder or solder holder can be attached to the thread. I recommend printing on the side with supports only on the printing plate. After printing, remove the supports and press the wheel from the top until you hear a click sound. You can then rotate the wheel.
If you want to move the part in the rotating connector freely, you can attach the offset ring to the part first.
.
You can screw the painting attachment on console to use like a painting handle.
To make a peg you need a peg mount and then peg part 1 and peg part 2 and a spring from a normal peg. I know, I wrote that this system is fully printable, so there is an option to print a fully printable peg model instead of peg part 1 and peg part 2. However, this peg does not work as well as the spring peg.
Pcb holder is used to attach PCB, but maybe you find another usage of this part.
To assemble the solder holder you need print solder holder part 1, solder holder part 2 and solder holder part 3. Then screw part 2 into part 3 and you can use the model to attach the solder.
This part slides onto the console.