Description and assembly
The model contains these objects: 5 pots, soil, tree stems and six leaves.
Assembly is very easy. No magnets or glue are needed. Soil goes in the pot, stems go in the soil and leaves go on top of the stems.
The assembled model has approx dimensions: 20x20x27cm.
About the model
The model is divided into several objects:
- Plant pot – Dimensions: 65x65x55mm.
- Soil – Contains 3 holes for stems.
- Leaves – There are 6 different leaf designs, all are divided into parts and pre-colored. While printing the leaves there will be 6 color changes. Approx leaf dimensions are: 90x100x2.5mm.
- Stems – There are 3 stem designs. Supports are needed only for the tips of the stems.
Colors:
I printed stems and leaves in leaf green and white color. The pot is gray and the soil is dark brown.
Print profiles and suggestions
Printing suggestions:
- Use slightly higher nozzle and bed temperature for the first layer when printing leaves to have fewer gaps between colors
- Print slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/s
- Supports are needed only for the tips of the stems.
Suggestions for scarf seams:
- Use scarf seam for printing the pot. With scarf seam the pot is almost seamless. Use these settings in Quality tab:
- Outer wall width: 0.6mm,
- Scarf joint seam: Contour,
- Conditional scarf joint: on,
- Wall generator: Arachne,
- Wall printing order: Inner/Outer/Inner.
Commercial Use
This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: https://patreon.com/noordinaryleaf