The suction cup can be easily attached to smooth surfaces such as glass or tiles, making it ideal for office or bathroom environments. Paired with IKEA’s pegboard and its rich ecosystem of accessories, there are many interesting ideas that can be realized. Feel free to share some fun uses in the comments section 💕

In terms of accessories, in addition to the printed parts, you will need 4 suction cup cover-type nuts measuring 4.1cm. The purchase link is as follows:

【淘宝】https://m.tb.cn/h.g5Hy13ryQwTghKF?tk=Mm8NWzph0AP CZ3452 「防滑固定32强力带铁螺丝杆透明玻璃吸盘无痕挂钩桌椅垫脚M4塑料」 点击链接直接打开 或者 淘宝搜索直接打开

The back hole is designed with a slight interference fit, requiring a hard object to hammer the nuts in. However, due to the tolerance variations in nut production batches, as well as differences in printing materials and ambient temperature and humidity, there may be issues with the fit. If it’s too loose, you can use 502 glue to secure it; if it’s too tight, you can adjust the tolerance in the source file to fit. I have uploaded a modifiable STEP source file 😁😁 I hope everyone enjoys using it.

This model is a modification of Clay2F’s open-source model and is open-sourced by ZA___