Tired of having your prints turn out noting like the posted “photo”? Then you've come to the right spot, I only post photos of the actual print and not the file they were generated from.

This was a request form one of my Patreon members, if you want to make a request and FREE *Patreon exclusive* models(like the ones below), members only models, and commercial licenses to sell your physical prints visit my Patreon in bio http://patreon.com/JustBe3D

Instructions

Can be rescaled just remember not to change the Z axis.

Important The photo is of the 5 color version. The 5 color version uses brown under the yellow for more of a gold look. The 4 color version uses black under the yellow for more of a dark yellow look.

You can also replace the purple with dark grey if you want a mono-color look.

5 color

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Dikale Purple Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Overture Chocolate Transmission Distance: 0.2
PLA Elegoo Yellow Transmission Distance: 7.2
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Purple
At layer #15 (1.28mm) swap to White
At layer #21 (1.76mm) swap to Chocolate
At layer #25 (2.08mm) swap to Yellow
At layer #29 (2.4mm) swap to White for the rest.

4 color

Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA Dikale Purple Transmission Distance: 1.4
PLA Overture White Transmission Distance: 4
PLA Elegoo Yellow Transmission Distance: 7.2
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Purple
At layer #15 (1.28mm) swap to White
At layer #21 (1.76mm) swap to Black
At layer #24 (2mm) swap to Yellow
At layer #29 (2.4mm) swap to White for the rest.