Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 137.33x200mm in size

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Beige
At layer #22 (1.84mm) swap to White for the rest.